Photonic Lab

Drop in a die. Sweep it.

A test board on an optical table, with fibre positioners, a tunable laser and a spectrum analyser. Choose a device, tune it and watch the response.

The spectra come from simple analytic models (Lorentzian ring resonances, a two-beam interferometer and a flat splitter). They illustrate behaviour. They are not solver output or measurements. Instruments and boards are conceptual and do not depict specific commercial products.

How the lab works

01

Choose the device

Each die drops into the gold submount and is wire-bonded to the board. The fibre positioners re-align to its input and output facets.

02

Tune it

The heater shifts ring resonances to longer wavelengths and sets the bias phase of the Mach-Zehnder interferometer.

03

Sweep the laser

Run a sweep to trace transmission across the C-band on the analyser, or drag λ and watch light at the output facet rise and fall.

Want real numbers?

The designers run actual solvers on your geometry and report convergence with the result.