01 — Photonic Intelligence
Design and simulate photonic devices with AI
Describe a device in a prompt or by voice. Photonic Intelligence lists the specifications for your approval, prepares the layout and simulation setup, and shows the results when the work completes.
02 — Field propagation
Watch the light decide
Inside a multimode interference splitter, guided modes beat against each other until one input becomes two. Every device on this die is drawn in your browser, with light animated from an analytic mode model.
- 1×2MMI self-imaging
- 5modes summed
- LiveWebGL shader
03 — The circuit
Modulate. Filter. Detect.
A Mach-Zehnder modulator writes data onto the carrier under travelling-wave electrodes. Four thermally tuned rings pick wavelengths off the bus and hand each one to its own photodiode.
- MZMGSG electrodes
- 4 λring filter bank
- Ge PDdrop ports
04 — Fabrication
From wafer to waveguide
Scroll through a silicon-on-insulator process: resist, exposure, etch, cladding and metal. Layer thicknesses are exaggerated so each step reads clearly.
Step 1 / 8 · SOI wafer
05 — Co-packaged optics
Inside an optical engine
The engine comes apart layer by layer: substrate, solder, photonic IC, bond interface, electronic IC, carrier, optical connector and thermal cap. The stack is reconstructed from public disclosures, and every part is tagged as sourced or inferred.
06 — On the bench
Then it meets the lab
A wire-bonded die on a test board, fibres aligned on positioners, a tunable laser on one side and a spectrum analyser on the other. Drop in a device and sweep it yourself.